SWF-101 – Integrated Type Extractor Ventilator


With stainless steel mesh to prevent from mosquito or any small insect go into the area being ventilated.

The structural design as explained below:

Intake and exhaust fan blade

These SUNVENTOR models come with two fan blades: intake and exhaust, intake fan blade is labeled "INTAKE"

To exchange fan blade, simply pull the existing blade off and insert / push the new one. Care must be taken in pushing or pulling the fan blade so as not to bend the motor shaft; otherwise, its performance would be grossly affected

If you have only one vent installed on your boat, we recommend using only the exhaust fan blade. If you have multiple vents, try different configurations of intake and exhaust to achieve effective cross flow ventilation.

Frame Size: 210 x 240mm

Tube Size: >= Diameter 110mm

Solar Panel: 3.5V

Material: ABS Plastic

Color Available: Black only

Solar Panel lead: 4 metres (102 & 104 models only)



For caravans, garages, green houses, lorries, vans, offices, home conservations, kitchens or bathroom substation. Lofts, house boxes, stables farm building, unoccupied holiday homes, temporary sites, telephone boxes, and many others.


Fully automatic operation powered by solar energy.

Avoid heat build-up at an area being ventilated.

Prevent mold, condensation, mildew, musty odors, damp, etc.

Moves 60 cubic meter of air per hour.

Water resistant

No noise, safe and pollution free.

Two years limited warranty.

Easy installation.

Buyer's Guide

Area Size: Recommended Use

Up to 7m: 1 exhaust vent

Up to 12m: 1 exhaust vent and 1 intake vent

From 12m or larger: 2 exhaust vent and 1 intake vent

WS SWF-101 Solar Wall Fan